The DV 5V-12V 120W Mini ZVS Induction Heating Board is a versatile and compact device that can be used for DIY projects such as cooker ignition, riscaldamento, e altro ancora. This board operates with a voltage range between 5V and 12V, rendendolo adatto a una varietà di applicazioni. It uses ZVS technology to efficiently heat up coils, and is a hot selling item. The board is designed to be easily integrated into projects with no tapping required, making it a convenient option for those looking to build their own heating systems.
5V-12V ZVS induction heating power supply module tesla Jacob's ladder + coil
1.the maximum power of 120W (12V induction heating)
Push the ignition coil 12V, when the primary 5 + 5 gira, 30W or so.
2. the input voltage DC 5V ~ 12V (5V voltage exceeds 12V or lower than the seller is not guaranteed to work properly, the input voltage is not within this range, a problem the seller is not liable!)
3. Make sure that all components soldered correctly, the power line is not reversed negative, then power!
Parametri del prodotto:
Potenza massima: 120W
Tensione di ingresso: DC 5V~12V
Module dimensions: 5.5 X 4 X 2 cm(L*L*A)
Coil size: lunghezza:7.5cm
Larghezza: 2.8cm
Come usare：
1. Weld the heating coil directly to the PCB
2. Tensione di ingresso: dc5-12V
3. Place the heated object: the width of the heated object shall be between 1 / 3 ~ 1 / 2 of the inner diameter of the heating coil as far as possible, and shall not exceed 2 / 3 at most! The diameter of the heated object shall be controlled within 20mm as far as possible. If it is too large, it will be difficult to heat to red. Dopotutto, the power is limited.
Il pacchetto include:
1 x induction heating power supply module
1 x coil
Recensioni
Ancora non ci sono recensioni.