5/Kit di estrazione

Driver-5/front-clamp technology for lite utility tractor buckets allows you to work the fire out of our tool and not the other way around. Most convenient mounting of our clamp & driver-5 could be on your bucket corner hand hydraulic side and does help operator from doinking their helper. Safety-first. Clamp has 7/8” gap & is placed between bucket scraping edge 5” deep where you will drill ½” hole in your bucket for mounting. Use washers to shim-up gap between your bucket & clamp. The offset/swivel helps each t-post to hang level & swivel allows independent alignment to fencerow. Driver’s latch holds each post up in driver/barrel and releases automatically. Our company has the only driver on the market that has ability to be raised up & over against your old barbwire fencerow & then press down post. (Heads-up) as each post is pressed down every now and then you’ll need to tilt your bucket or backup slightly to keep each tee post straight to prevent t-posts from kinking. After planting six t-posts you are an expert. Drop-gage is set to your tee post height. (Extremely harden ground) in worst conditions add a pipe before placing post up into driver. Your local muffler shop could cut a pipe the height of your t-posts above ground minus the length of driver barrel. Autista & pipe should touch when pressing down to your correct post height. (Add more safety rules because there are more pinch-points for you to watch out for). Pull tee posts by sliding driver barrel down over post at least three t-post notches then place 5/8 pin across bottom and lift.
Realizzato negli Stati Uniti
Every t-post used by farm and ranchers work & are held & released automatically
Only driver designed to aid in parcel replacement of posts against barbwire fence
Designed for pressing in new or clean tee posts with safety and ease in mind
College has planted over 20 miles of tee posts with our driver-5

1. What types of materials are included in the 5/Puller Kit?
– The 5/Puller Kit includes high-quality stainless steel pullers designed for various purposes such as dent removal, nail removal, and prying.

2. Is the 5/Puller Kit easy to use for beginners?
– SÌ, the 5/Puller Kit is designed for easy use by beginners and professionals alike. The tools are user-friendly and come with instructions for proper usage.

3. Can the 5/Puller Kit be used on all types of surfaces?
– The 5/Puller Kit is versatile and can be used on most surfaces, compreso il metallo, legna, plastica, e altro ancora. Tuttavia, it is always recommended to test a small area first before applying full pressure.

4. How durable are the pullers in the 5/Puller Kit?
– The pullers in the 5/Puller Kit are made of durable stainless steel that is built to last. They are designed to withstand heavy use without breaking or bending.

5. Are replacement parts available for the 5/Puller Kit?
– SÌ, replacement parts for the 5/Puller Kit are available for purchase. If any part of the kit becomes damaged or lost, you can easily find and order a replacement to keep your kit complete and functional.