DB9 serial to RJ11 RS232 to RJ11 adapter for APC PDU cable 940-0144A
DB9 RS232 to RJ11 6pin for APC Metered Rack PDU 940-0144A Compatible 2G Rack Switches
APC Rack PDU (AP78xx, AP79xx, AP86xx, AP88xx, AP89xx) and 2G Rack Automatic Transfer Switches (AP7752, AP7752, AP7730, AP7732, AP7721, AP7723)
Compatible with APC part 940-0144A
RJ12 to DB9. Compatible with Rack PDU (AP78xx, AP79xx, AP86xx, AP88xx, AP89xx) and 2G Rack Automatic Transfer Switches (AP7752, AP7752, AP7730, AP7732, AP7721, AP7723). APC part 940-0144A
APC pins 1 et 6 are usually not connected
Ensemble 9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control to communicate.
Apply the port settings to establish the connection.
Presse 3-5 times to display the username prompt.
Use the default username and password of apc
It is possible to use RJ11 plug that has only the middle 4 pins (2,3,4,5). connected APC pins 2,3, et 4 only and it workes perfect.
|
APC RJ12 |
PC DB9 |
|
1 |
1 (*) |
|
2 |
5 (GND) |
|
3 |
2 (RX) |
|
4 |
3 (TX) |
|
5 (GND) |
5 |
|
6 |
1 (*) |
Reviews
There are no reviews yet.