2024 NOUVEAU 4 DANS 1 Raycus 1500W Fiber Laser Welding Cleaning Cutting Machine Weld Seam Clean Machine water chiller
|
Modèle |
Fiber laser welding machine |
|
Laser wavelength |
1070nm |
|
Laser power |
1500W |
|
Mode de fonctionnement |
Continuous/pulse |
|
Length of fiber-optical |
10m(standard) |
|
Interface of fiber-optical |
QBH |
|
Module life |
100000heures |
|
Alimentation électrique |
220V / 380V |
|
Cooling method |
Refroidissement par eau |
|
Laser Energy Stability |
<2% |
|
Air humidity |
10-90% |
|
Recommended welding thickness |
1500W Stainless steel, acier au carbone 0-2 mm |
|
Red light positioning |
Soutien |
Its handheld laser guns can cut and weld metals and clean rust, peinture, resin, coatings, huile, et taches.
As a laser cleaner, it is a "green" cleaning method. It does not need to use any chemical agent and cleaning solution. The cleaned waste is basically solid powder. It is small, easy to store and recyclable. It can easily solve the problem of environmental pollution caused by chemical cleaning.
As a laser welder, the welding seam is smooth and beautiful, Pas besoin de polir, no deformation or welding scar, firm welding of the part. Save time and improve efficiency.
As a laser cutter, it is very easy to operate to cut all types of metals.
● Raycus Laser
Compared with traditional lasers, 100000+hrs fiber lasers are more stable, energy-saving, and maintenance free.
● S&A Water-Cooled Machine
Water cooling has a longer continuous working time than air cooling and can work all day long.
WELDING CLEANING MACHINE
● More Materials: suitable for high-speed welding for various materials such as steel, aluminium, cuivre, titane, nickel alloys, etc.;
● Faster: 4 times faster than TIG and MIG
● Simple: presetting parameter can shorten the learning curve, half hour -2 heures, from beginner to expert
● Low heat input: minimize part deformation to the greatest extent possible
● Specially designed weld cleaning nozzles to create visually appealing welds while eliminating the need for post polishing
4 Dans 1 Welder Laser Soldering Machine Combo Laser Metal Cleaning Main Features
1. Three working modes, soudage + coupe + nettoyage. Simple switching, only need to replace the copper nozzle,
switch the system
2. About fiber cable length
Standard length is 10m, if you have other needs, we support shortening or lengthening.
3. Auxiliary gas: nitrogen or argon
If the welding surface effect is required to be white and bright, nitrogen or argon is required
If there is no requirement for the welding surface, add compressed air freeze Dryer, air is OK.
4. About wire feeder
Il's the machine standard configuration, we will send to you together with the whole machine.
5. Garantie de la machine: 3 years for whole machine, 2 years for laser generator.
Laser Welding
1) The weld seam is smooth and beautiful,The welding workpiece has no deformation, the welding is firm, and no
subsequent grinding process is required, which saves time and cost.
Fast welding speed, 2~10 times faster than traditional welding.
2) Easy operating need no training
Welding seam beautiful smooth and beautiful, don’t need polish, Gagnez votre temps
No deformation or welding scar, firm welding of the workpiece.
3) Entretien facile
Laser welding has less consumables and long service life. Plus sûr, plus respectueux de l'environnement.
4) Wildly used in cabinet kitchen and bathroom, stair elevator, étagère, four, stainless steel door and window
guardrail, distribution box, stainless steel home.
Laser cleaning
1) Laser Rust Removal: Laser light can easily remove rust, after removal, the surface is restored to a bright metallic color or restoration of the original base color.
2) Laser Oil Removal: Metal surface oil cleaning (can remove oxide film at the same time)
3) Laser Paint Removal: removes various paints including auto Duco on various substrates and automobiles
4) Stripping coating (galvanized layer, aluminized layer, protective coating, etc.)
5) Removal of aluminum alloy, titanium alloy, copper alloy oxide film
6) Pre-Weld Pretreatments: After laser cleaning pretreats the aluminum alloy, the welding porosity defects are effectively suppressed
7) Cleaning after welding: Non-Contact NDT removal of post-weld oxide film and slag residue
8) Aluminium alloy pulsed lasers remove dirt and oxide film before welding
Avis
Il n’y a pas encore d’avis.