Hand Cobbler Shoe Repair Machine Dual Cotton Nylon Line Sewing Machine

Description du produit

FamYun Hand Cobbler Shoe Repair Machine

Description

The sewing machine can sewing different material shoe by nylon or cotton wire. The machine is suitable for repairing high heels, cloth shoes, leather shoes, rubber shoes, sneakers, as well as raincoats, leather bags, trousers, cloth, or other leather products or cloth goods.

Features Easy to assemble and use Quiet and smooth efficient performance Free arm for hard-to-reach places Metal construction, wear-resistant and durable Made to sew different heavy-duty fabrics Tripod-type stand that can be easily controlled

Pressure Plate

Adjust the tension of the upper thread (just adjust one of them).

Needle Collet And Presser Foot

The role of a fixed Needle,there is a groove on the needle, which must face outward, otherwise the thread will break.

Hand Crank

When working, remember not to roll back to prevent the shuttle from hitting it

Universal Wrench

Can rotate 360 degrés, adjust your work route at anytime.

Wire Machine

The used bobbin can be wound here.

Presser Wrench

Lift the presser foot up and pull it down to start working.

Sittich Adjustment

Turn the screw up and down to adjust the stitch length,the stitch length can be adjusted up to 0.7 pouce.

Shoe Machine Bracket

Triangular bracket design has strong stability, a good helper for the old and long-term shoe repair machine with lock.

Leather Shoes

Leather Bags

Cloth Bag

Canvas Tent

How to use the sophisticated shoe repair machine？

Assemble the tripod at first. Put the main body on the tripod. Make sure it is the same angle as the two corners.Swing the nylon thread in the studs.These card slots fit with the locks. Assemble the crank. Rotate the handle at ease to start the machine.Thread through the route step by step.Easy to pull the string when it is finished.Use the screwdriver to pry open the base. Take out the small coil and thread it.Observe whether the needle has touched the operating pieces. Use the wrench to twist the needle when it does touch.Alter the sewing space by controlling the spin button. Choose your desired space clockwise or counterclockwise.

Open the tripod and place the fuselage on top and secure the bolts. Check if the fixing screws of each department are tight. Add some lubricant at the machine connection. Note

It is hand-made by the master blacksmith, so the product will leave a knocking mark, not as smooth as the machine that be mold made. And the material of this product is iron which is easy to rust, so the surface of the machine is coated with anti-rust oil.

Package Include

1 x Shoe Repair Machine

1 x Little Rocking Arm

1 x Tripod-type Stand

1 x Machine Needles

1 x Cotton Coils/Screwdriver/Iron Wire

2 x Bobbin

2 x Bobbin Cover

1 x Small Sheetmetal/ Instruction Manual

Attention

The preparation before operation, pull up the presser foot, avoid friction, presser foot and needle plate check each fixed screw fastening, the ministries refueling point add lubricating oil, shake guide plate, no voice sound can be used.

This machine can be used with nylon line and cotton line, can be used with Prince line and other lines, Max.. sewing thickness is 5mm.
Can sewing different material shoes by nylon or cotton wire.(Such as cloth shoes , rubber shoes , leather shoes , sneakers , high heels , as well as raincoats , leather bags , cloth , trousers, or other leather products.
The distance between the needles can be regulated, and the Max. width is about 6mm.
It is hand-made by the master blacksmith, so the product will leave a knocking mark, not as smooth as the machine that be mold made.
Service: Customer satisfaction is the most important, if you’re not 100% satisfied with the product,please contact us by email on Amzon of « Ask a question » button,we’ll sove it for you.

1. Q: How long does it take to repair a pair of shoes using the Hand Cobbler Shoe Repair Machine?
UN: The repair time can vary depending on the extent of damage and the complexity of the repair needed, but on average, it usually takes between 1-2 hours to repair a pair of shoes.

2. Q: Can the Hand Cobbler Shoe Repair Machine handle different types of materials, such as leather or canvas?
UN: Oui, this machine is designed to work with a variety of materials, including leather, canvas, and nylon. It can effortlessly sew through these materials to provide a durable and secure repair.

3. Q: Is the Dual Cotton Nylon Line used in this machine durable and long-lasting?
UN: Oui, the Dual Cotton Nylon Line is specifically chosen for its strength and durability. It is able to withstand the wear and tear of regular use and provides a reliable bond for your shoe repairs.

4. Q: Do you provide any warranty or guarantee for the Hand Cobbler Shoe Repair Machine?
UN: Oui, we offer a warranty on our machine to ensure that you are satisfied with your purchase. Please refer to the product description for more details on our warranty policy.

5. Q: Can I use the Hand Cobbler Shoe Repair Machine for other types of repairs, such as bags or belts?
UN: While this machine is primarily designed for shoe repair, it can also be used for other small repair projects, such as fixing bags, belts, and other leather goods. It is a versatile tool that can be used for a variety of DIY projects.