Bende à barres électriques & Bandage à barres d'armature de la machine à découper 1 »/25 MM a

Bende à barres électriques & Cutter Machine Steel Bender (1600W)

Cintreuse de barres d'armature & Cutter Machine

5 Seconds Cut-off Speed & 6-7 Seconds Bending Speed, 300% efficiency increase for rebar installers!

Deux ajustements d'angle

Roue de fine: High-strength Ø78 Gyre Idler Wheel and Ø94 Fixed Idler Wheel are made of iron materials

Humanized Foot Pedal & Poignée

Application approfondie: Suitable for various construction scenarios

Vitesse de flexion: 6-7 Secondes
Cut-off Speed: 5 Secondes
Diamètre de barres d'armature: 1/4 » #2 à 1″ #8 Grade 60
Bending Angle: 0-180°
Bending Radius: 1.57 » / 40 mm
Max Rebar Hardness: HRC30
Tension: 110V
Pouvoir: 1600W
Ampères: 14UN
Modèle: RBC-25
Dimensions de l'article(L x w x h): 19.6 » X 17.7 X 31.1 »
Hydraulic oil type: VG46

【Powerful 1600W Copper Coil Motor】 Equipped with a 1600W pure copper motor, this rebar cutter and bender runs quietly, has low noise, and improves working efficiency, reducing unnecessary wear. The copper motor extends the operating life of the machine. It operates at a voltage of 110V, frequency of 60 HZ, with amps of 14A, and a noise level of 92 db(UN).
【Lightning-Fast Performance】 The rebar bending and cutting machine boasts exceptional performance, bending rebar from 1/4 » #2 à 1″ #8 Grade 60 (6 à 25 mm) dans 6 à 7 seconds and cutting rebar within 5-6 secondes. It can bend at any angle from 0-180° with a bending radius of 1.57 » / 40 mm, and its maximum rebar hardness is HRC30. The hydraulic oil type used is VG46.
【Angle Adjustment Made Easy】 The rebar bending machine has two slide-type angle selectors, making it easy to bend any angle from 0-180 degrés. Preset angle locks ensure accurate, repeatable angle bending. During bending, the angle of point 1 must be greater than point 2 for proper operation.
【Durable Construction】 This bar bender machine has a sturdy iron machine body and durable Idler Wheel. The Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are strong and unlikely to break. It can handle super-hard rebar with strong clamping force, reducing steel rebar waste.
【Easy to Use and Transport】 The heavy-duty rebar cutter bender comes with a standard foot pedal control switch for hands-free bending. Four handles on the corners make it easy to transport and operate. It is widely used in construction engineering for bending or cutting rebar, barre d'acier, steel rod, screw thread steel, carbon steel, round steel, etc..