Bobbin Winder Portable White Household Industrial Electric Automatic Bobbin Winder Sewing Winding Tool
Fonctionnalité:
1. Portable: The compact cord winder allows you to easily carry it with you, a simple one touch cord winder.
2. Caractéristiques: Bottom suction cup design, more stable when winding. Comes with lock, hidden handle, and dustproof.
3. Two Kinds Of Bobbin Fixing Structures: The Bobbin Of Industrial Household Sewing Machine Can Be Wound.
4. Deux modes d'alimentation: Charge USB (USB Type-C charging cable not included) or dry battery power supply (Batterie non incluse), built-in storage space.
5. High-Speed Motor: Use this machine to wind the bobbin quickly and evenly, and automatically stop when the bobbin is full.
2. Caractéristiques: Bottom suction cup design, more stable when winding. Comes with lock, hidden handle, and dustproof.
3. Two Kinds Of Bobbin Fixing Structures: The Bobbin Of Industrial Household Sewing Machine Can Be Wound.
4. Deux modes d'alimentation: Charge USB (USB Type-C charging cable not included) or dry battery power supply (Batterie non incluse), built-in storage space.
5. High-Speed Motor: Use this machine to wind the bobbin quickly and evenly, and automatically stop when the bobbin is full.
spécification:
Type d'article: Bobbin Winder
Matériau du produit: Plastique, Acier inoxydable
Spécification du produit: 1 Morceau
Product Use: Ménage
Scénarios applicables: Most Scenarios
Batterie: 2 x piles AA (Batterie non incluse)
Taille du produit: Environ 8.8 X 14 x 10cm / 3.4 X 5.4 x 3.9in
Liste des paquets:
1 x Electric Winding Machine
1 x Manuel d'utilisation en anglais
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
Comment utiliser:
1. Remove the battery cover from the bottom of the machine.
2. Insérer 2 x 1.5VAA batteries (pas inclus) comme le montre l'image, then reattach the battery cover. Or plug the USB data cable into the Type C socket and supply power through the DC5V power adapter. Note: Use only non-rechargeable batteries.
3. Pull up on the locking tab to open the top cover.
4. Raise the spindle to the fully extended position and place the spool on the spindle.
5. Following the numbers and direction arrows, pass the thread between the eyelet and the two clips of the suture tension disc. Pass the end of the thread through the hole in the bobbin, insert the bobbin into the winding shaft, and turn the bobbin slightly until the spring on the shaft snaps into place.
6. Make sure the bobbin bar is installed between the top and bottom rims of the bobbin.
7. Appuyez sur le « SUR » button to start. Winding stops automatically when the bobbin is full. If you want to adjust the winding amount of the bobbin by you
Avis
Il n’y a pas encore d’avis.