Kit de pilote-4 / tireur

Driver-4 kit designed for tractor buckets to allow your utility tractor to work the fire out of our tool and not the other way around. Most convenient mounting of clamp/driver-4 is on bucket corner hand hydraulics side and does help keep operator from doinking their helper. Clamp has 7/8” gap to be placed between bucket scraping edge 5” deep where you will drill ½” hole in your bucket for mounting. We sent washers to shim up gap between your bucket & clamp. Driver offset/swivel helps each t-post to hang level & swivel allows independent alignment to fencerow. Driver-4 barrel is 80% open to allow twisted beaten up posts in and out of driver barrel. Gripper is mounted on the bottom of barrel along with our t-post puller. No need to put a gorilla grip to each post & unsnap gripper’s just before pressing down that saves on the old wear and tear. Every now and then tilt your bucket or backup slightly when pressing down keeping each post level to stop bowing & kinking. After you planted 6 t-posts you are an expert. Only driver on the market that has ability to be raised up over and up against your old barbwire fencerow then press down tee post. (Extremely harden ground) in worst conditions add a pipe before placing post up into driver. Your local muffler shop could cut a pipe the height of your t-posts above ground minus the length of driver barrel. Conducteur & pipe should touch when pressing down to your correct height. Pull tee posts by sliding driver barrel down over post at least three t-post notches then place 5/8 pin across bottom and lift. Please consider what took you all day of working hard to accomplish by hand now takes an hour of just being there.
Fabriqué aux États-Unis
Your tractor bucket does the work & every stile farm or ranch tee post fits
Designed for old beaten over used tee posts plus new posts work great to
A gripper is mounted on the bottom of barrel along with our t-post puller
Large Okla college has planted 20 miles of t-posts on 18 different state locations

1. What is included in the Driver-4/Puller Kit?
– The Driver-4/Puller Kit includes a driver handle, four different sized puller attachments, and a carrying case for easy storage and transport.

2. Can the Driver-4/Puller Kit be used on all types of screws and fasteners?
– Oui, the puller attachments in the kit are designed to fit a wide range of screw sizes and types, making it versatile for various DIY and professional projects.

3. How do I use the Driver-4/Puller Kit to remove stripped screws?
– To remove a stripped screw, simply select the appropriate puller attachment that matches the screw size, place it over the screw head, and turn the driver handle in a counterclockwise direction to remove the screw.

4. Is the Driver-4/Puller Kit easy to use for beginners?
– Oui, the kit is designed for ease of use and comes with simple instructions. It is suitable for beginners and experienced users alike.

5. Does the Driver-4/Puller Kit come with a warranty?
– Oui, the Driver-4/Puller Kit comes with a standard warranty to ensure customer satisfaction. Please refer to the product packaging or contact us for more information on warranty coverage.