ANBULL 1100W REBAR BENDER (NRB-20)
spécification
Modèle: RB-20
Wattage: 1100W
Bending Angle: 0-100 Degrees
Bending Capacity: Bending up to 20mm 3/4″ #6 rebar
Poids: 15.2kg / 33.5Kg
Dimension: 25.6″ X 5.3″ X 8.66″
Détails
Ergonomic Upper Handle
Specifically designed for job-site operation.
Precision Quench Technology
Anbull electric hydraulic rebar bender comes with a bending block quenched with precision steel casting technology.
Multiple Ring Nut Design
High Strength Cutter Head With Durable Seals.
Pressure relief valve
When reach the angle you want, release the switch. Loosen the pressure release switch, the bending block resets.
Hydraulic-powered Piston
Hydraulic-powered piston features strong thrust with less power consumption and low noise to extend the service life.
Forced Air Cooling
Better heat dissipation and longer service life.
NRB-22 & NRB-20 Machine Head Comparison
Ajouter au panier
Ajouter au panier
Ajouter au panier
Ajouter au panier
Ajouter au panier
Avis des clients
4.5 hors de 5 étoiles 55
4.2 hors de 5 étoiles 38
4.2 hors de 5 étoiles 38
4.2 hors de 5 étoiles 38
4.5 hors de 5 étoiles 6
4.2 hors de 5 étoiles 140
Prix
$469.99
$599.99
$648.37
$648.37
$269.99
Wattage
900W
1100W
1200W
1500W
/
900W
Bending/Cutting size
Bending up to 16mm 5/8″ #5 rebar
Bending up to 20mm 3/4″ #6 rebar
Bending up to 22mm 7/8″ #7 rebar
Bending up to 25mm 1 pouce #8 rebar
Straightening Up to 25mm 1″ #8 rebar
Cutting Up to 16mm 5/8″ #5 rebar
Bending Angle
0-130 Degrees
0-100 Degrees
0-130 Degrees
0-130 Degrees
/
Non
Blending Block Replaceable
Non
Non
Oui
Oui
Only for RB-22 & RB-25 Rebar Bender
/
Cutting/Bending speed
3-4S
5-6 S
5-6 S
5-6 S
/
2.5-3S
Powerful 1100W Pure Copper Motor: With the electric hydraulic-powered motor and piston, Anbull rebar bender makes each bend fast and efficient. It features strong thrust with less power consumption and lower noise.
Great Bending and Straightening Capacity: Anbull RB22 rebar bender has powerful push and pull capabilities allowing bending or straightening 7/8″ 22mm rebar to 0-100° within 5 seconds, satisfying various manufacturing needs. (Note: The rebar straightening head (ASIN: B097MHZYJP) cannot be used for RB-20, only for RB-22 & RB-25)
Three-point Bending: Designed with a piston that moves forward forming a three-point bending system for the rebar bending head, making bending fast and efficient.
One Button Operation: With its compact and portable design, it can be easily carried by one person for effective on-site construction. It runs on a standard 110V outlet, perfect for all rebar projects at the workplace and on the job site.
Precision Quench Technology: Equipped with a pressure relief valve to release power after bending, our electric hydraulic rebar bender comes with a bending block quenched with precision steel casting technology.
Reviews
There are no reviews yet.