M2 HSS 3/8″,1/2″,5/8″,3/4″,1″Bridge/Construction Reamer,enlarge and align existing holes for Steel,Métal, Alliage, Aluminium, Wood etc
5 pieces bridge/construction reamer set including:
Reamers Sizes:3/8″,1/2″,5/8″,3/4″,1″
Matériel:High-Speed Steel (HSS),M2
Cutting Direction:right-hand
Shank Diameter:1/2″
The taper chucking reamer set is used to expand a hole to 3/8″,1/2″,5/8″,3/4″ ou 1″. At first there must be a existing holes,then ream out to and 3/8″,1/2″,5/8″,3/4″ ou 1″.
Par exemple, If you need to expand a hole to 5/8″,at first there must be a 1/2”,1/4»,1/8»,3/8»,3/16»,5/16»,7/16»,9/16»,5/32»,7/32»,9/32»,11/32»,13/32” or 15/32”pre-drilled hole,then ream out to 5/8″.
3/8″,1/2″,5/8″,3/4″,1” M2 HSS Bridge/Construction Reamer Drill Bit Fit 1/2″ Shank Chuck with 5 Spiral Flutes
Reaming with a magnetic drilling machine.
Mounted to an impact drill for faster results.
Point is tapered to permit entry into overlapping holes.
Made more easily work of steering knuckles and pitman arm.
It used for aligning an existing hole and enlarging undersized hole.
Aligns and enlarges pre-drilled holes ready for bolting,make the bolt holes line up.
Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs.
Conseils chaleureux:Pls kindly put some cutting oil before you use the taper construction reamer.
Dimensions du colis : 9.88 X 7.91 X 1.85 pouces; 2.76 Livres sterling
Numéro de modèle de l'article : BR-010
Date de première disponibilité : Février 29, 2024
Fabricant : NOVINO
ASIN : B0CWRLL4BP
Pays d'origine : Chine
M2 HSS taper chucking reamer 5pcs set including 3/8″,1/2″,5/8″,3/4″ and 1” fit 1/2″ shank chuck with 5-Spiral Flute. The bridge construction reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to enlarge a hole, you must first have an existing hole and then use our taper reamer to enlarge it
The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our taper reamer bit aligns and enlarges pre-drilled holes ready for bolting
Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be an existing hole or pilot hole with a diameter smaller than our bridge steel reamer bit before use
The tapered point design permits the tapered reamer for metal to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm
Commonly used in bridge,construction,steel erection and automotive truck trailer industries,our bridge/construction reamer bit for steel,métal,alloy aluminum,laiton,plastique,fer,nickel,cuivre,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools
1. What materials can the M2 HSS taper chucking reamer set be used on?
– The M2 HSS taper chucking reamer set is suitable for use on a variety of materials including steel, aluminium, laiton, et autres métaux.
2. What sizes are included in the 5PCS set?
– L'ensemble comprend 5 taper chucking reamers in the following sizes: 3/8″, 1/2″, 5/8″, 3/4″, et 1″.
3. Are the reamers durable and long-lasting?
– Oui, the M2 HSS material used in these reamers ensures durability and longevity, making them a reliable tool for your projects.
4. Can these reamers be used in a handheld drill?
– While these reamers are typically used in a chucking reamer holder, they can also be used in a handheld drill with the appropriate care and technique.
5. What is the best way to maintain and clean these reamers for optimal performance?
– Pour garantir des performances et une longévité optimales, it is recommended to clean the reamers after each use with a solvent or degreaser, and store them in a dry place to prevent rust and damage. Regular sharpening and maintenance will also help prolong the lifespan of the reamers.
Avis
Il n'y a pas encore d'avis.