20CM Chambre d'aspiration en acier inoxydable pour faire de la colle AB, Résine époxy, et gel de silice avec un baril de réservoir de dédouanement de capacité de 5L

Paramètres techniques:

Volume: 5L
Vacuum Chamber diameter: 20CM
Poids: 3.5KG
Barrel wall thickness: 1.5MM
Couvercle: 1/2 « Épaisseur, Acrylique
Vacuum Gasket: silicone, resistant to Butane and other solvents.
Vacuum Gauge Assembly: 0.5 inHg Accuracy.
Valve Assembly: Very high quality air-tight brass valves, with 50um filter on vent port
Vacuum Hose: 3.3 ‘/ 1 meter food grade collapse-proof silicone hose, 3mm wall thickness (8mm I.D, 14mm O.D)
Vacuum Pump Adapter: 3/8 Awning hose barb to 1/4 SAE flare port

Instructions pour une utilisation:

1.Stainless steel chamber with welded handles for long-term air-tightness performance. (Typical through-hole handles might lead to leakage after long-term operation)
2.Our chamber has a rounded edge at the top, for the protection of silicone gasket.
3.Vacuum gauge is assembled on a separate port, so that the reading remains accurate even while pumping / venting the chamber.
4.Gauge reading in both inHg and Mpa.
5.All kits are vacuum tested for 24 hours before packaging. (Leakage less than 2.0 inHg 24 heures)
6.Two-sided flippable vacuum gasket for better durability and reliability.
7.The gasket is chemically resistant to butane and other solvents.
8.1 / 2 « thickness Polycarbonate lid is light-weight, but 30x tougher than Acrylic.
9.Strong elastic food grade silicone vacuum hose can connect / disconnect easily with the pump / chamber.
10.50um air filter on the vent valve to reduce air flow and prevent any dust / powder flowing into the chamber.
11.Easy to install and low-cost to maintain: the chamber can be assembled in 5 minutes.
12.Please note the package will only include the chamber.