The 1300W Hand-Held Electric Concrete Vibrator is a powerful tool used for vibrating concrete to remove air bubbles and ensure a smooth finish. It comes with a 2m hose shaft and 35mm diameter poker for effective operation. This tool is portable and easy to use, making it ideal for construction projects where concrete needs to be compacted quickly and efficiently. The electric motor provides consistent power, allowing for precise control during the vibrating process. Dans l'ensemble, this concrete vibrator is a reliable and effective tool for any concrete finishing job.
1300W Electric Concrete Vibrator Vibrating Poker 2m Hose Shaft Hand-Held 4300rpm
Note:
There are two specifications of products in this link: American and European;
American standard voltage 110V; European standard voltage 220V;
According to the country, we will send products with corresponding specifications.
Caractéristiques
Modèle: 35-1
Matériel: Nylon, Steel Wire, Caoutchouc, Cuivre
Style: Vibrateur en béton portable
Couleur: Jaune
Source d'énergie: Électrique câblée
Type de moteur: Pure Copper Motor
Prise: US Standard/EU Standard
Pouvoir: 1300W
Actual Power: About 1000W
Vitesse: 4300RPM
Tension de bouche: 110V/220V
Longueur du cordon d'alimentation: 2m/6.6ft
Vibrating Rod Size(L*D): 2m*35mm/6.6ft*1.3inch
Emballage inclus
1* Vibrateur en béton
1* Vibrating Rod
Notes
-
Before running the concrete vibrator, you should check whether the power cord connection is correct and put on insulated gloves (pas inclus). After the power is turned on, if the concrete vibrator does not produce vibration, you can generally knock the end of the concrete vibrating rod to the ground, and after the vibrator makes a smooth and powerful chirping sound, you can carry out the pounding operation.
-
When a vibrating rod works, it should be inserted vertically or inclined into the soil, pounding vibration after some time can be. The vibration of the vibrating rod should be up and down pumping. The vibrating rod should not be bent more than 60°.
-
After working continuously for half an hour, the vibrating rod should stop for a while to prevent the machinery from heating too much and damaging the machine parts.
-
After using it for some time, the vibrating rod should be checked to see if the threaded connection of the rod head is loose to prevent the mortar water from penetrating the rod, causing the vibrating rod not to vibrate.
-
Veuillez permettre la légère différence de couleur causée par la lumière de prise de vue et l'erreur de 1 à 3 cm en raison de la mesure manuelle, et assurez-vous que vous ne vous dérangez pas avant de commander.
Avis
Il n’y a pas encore d’avis.