Brand New 18" X 18" Silk Screen Printing Flash Dryer Adjustable Stand T-Shirt Curing
Beschreibung:
This is a professionally built brand new flash dryer. It has a 18×18" heating grid opening, Räder, and a standard 110V plug so there is no special wiring required. This unit can be raised or lowered from 30" to 48". It is very heavy duty. The temperature is over 180 degrees F at distance of 2 1/2" below the flash heating element. It can easily cure plastisol ink for silkscreen printing.
The unit is ultra heavy. It has a base diameter that is reasonable (about 38"). It can easily roll thru standard 32" door way. We have a Ranar flash dryer. It is only about 2/3 the weight. It is much lighter so its base has to have a big diameter (over 50") to prevent it from tipping over. (see photo above ) This create quite a bit of inconvenience because we keep on tripping or kicking the Ranar flash unit while we are working on Silk Screen Printing. This flash dryer base is compact and it will not tip over because it is heavy.
Notiz:
Notice the fusing fuse in a long time continuous period, rest for cool, and check it regularly. Reserve properly, for electrical components is attractive to dust. Clean it's platform regularly before use and after. This item takes approximately 5 minutes from initial turn on to stabilize temperature. There will be natural fluctuations in the temperature as you use the item.
\
Besonderheit:
2 Jahrsgarantie
Ein/Aus -Schalter, No Timer
Basic assembly tools included
380-degree level swivel head
Heavy Duty Steel Bearing Castors
Adjustable height floor stand from 30" to 48"
Double Boxed for secure and rigid packaging
Black Powder Coated Steel Welded Frame
Secure Handle for Moving the Dryer in production
1700 Watt, on/off switch and over current protection
Styrofoam padded on all sides and internally secured
Shrink wrapped parts in shipping box for safety in transit
Sturdy Base with wheels for easy use
Plugs into a standard wall outlet
Runs on standard 20 amp house circuit.
Powder coated finish
Spezifikationen:
Mindesthöhe: 30"
Maximale Höhe: 48"
Heizbereich: 18" x 18"
Base Dimensions: 38" x 38"
Top Dimensions: 29" x 19"
380-degree level swivel head
Average Current Draw: 13 Verstärker
Maximum Current Draw: 16.5 Verstärker
Average Power Usage: 1350 Watt
Maximum Power Usage: 2000 Watt
Zusammengebaute Abmessungen: 38" x 38" x 48"
Eingangsleistung: 110V/60Hz or 220V/50Hz
Max Temp: 60 Grad Celsius
1700 Watt, on/off switch and over current protection
Suggest Temp Range: 0-60 Grad Celsius
Einzelheiten:
Anwendung:
It can easily cure plastisol ink for silkscreen printing, widely used in home offices and presses which leading the paper era.
Paket Inhalt:
1 X Head
4 X Base Leg
1 X Below Support Bar
1 X Top Support Bar
4 X Caster
1 X Handle
8 X Screw For Base Legs
1 X Base Leg Support Plate
Some Tools
Paket:
Packungsgröße: 83 X 28 x 59cm
Bruttogewicht: 25kg
Rezensionen
Es liegen noch keine Bewertungen vor.