Beschreibung
The components in this set are made of high-quality steel and cast iron, which have high toughness and are very durable. Sharp tenon drills of various lengths can achieve different working results. Well-made components and smooth surfaces not only are very safe to use but also have a long service life
Anwendung
This set can be used in furniture factories, pattern shops, wood processing factories and other building installation and decoration industries.
This set can be installed on a 2.08″, 2.16″, 2.28″ and 2.36″ bench drill and used as a square tenon to make square holes.
Spezifikationen
Material: Cast Iron; Stahl
Bruttogewicht: 5.5kg/12.12 lbs
Net Weight: 5kg/11.02 lbs
Toolbox Size: 35*45*12cm/13.8*17.7*4.7″
Tenon Drills Size: 1/4″; 3/8″; 1/2″; 5/8″
Drill Sleeves Diameter: 53mm/2.08″; 55mm/2.16″; 58mm/2.28″; 60mm/2.36″
Lieferinhalt
1* Toolbox
1* Locator
1* Press Block
2* Side Positioning Rods
1* Connecting Rod
1* Fixed Seat
4* Fixed Screws
4* Fixed Bolts
1* Wrench
1* Support Base
4* Tenon Drills
4* Drill Sleeves
Anmerkungen
1.Please make sure your bench drill chuck is not less than 15.7″ away from the table vertically before purchase, otherwise, it cannot be installed.
2.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
Tough and Durable: The components inside this set are made of high-quality steel and cast iron to ensure more toughness. It is also not easily damaged or rusted under proper use and is very durable.
Multiple Drill Lengths: Our tenon drills are available in 4 different lengths 1/4″, 3/8″, 1/2″ and 5/8″. The multiple lengths help you meet your different working needs.
Hohe Präzision: This set can be firmly installed on the bench drilling machine. This prevents movement and allows for more precise positioning and cutting.
Chip Removal: There is a chip removal hole above the tenon drill to remove the chips produced during the drilling so that they do not clog the hole. It will make your work more convenient.
Safe to Use: The smooth surface will not hurt your hands and is very safe to use. These high-quality materials can avoid the problems of component breakage and deformation, which provides you with a safer environment.
1. What type of drill press is compatible with the Tenon Tools Mortising Attachment?
– The Tenon Tools Mortising Attachment is compatible with most 3/4-inch chuck drill presses.
2. Can I use the Mortising Attachment for drill press on hardwoods like oak and maple?
– Ja, the Mortising Attachment can be used on all types of woods, including hardwoods, with the appropriate drill bits.
3. How do I adjust the depth of cut when using the Mortising Attachment?
– The depth of cut can be adjusted by moving the workpiece up or down on the drill press table and adjusting the depth stop on the Mortising Attachment.
4. Can I use the Mortising Attachment to create different sized tenons?
– Ja, the Mortising Attachment comes with multiple sizes of chisel and bit sets to create tenons of various sizes.
5. Is the Mortising Attachment easy to set up and use?
– Ja, the Mortising Attachment is easy to install on your drill press and comes with clear instructions for use. With practice, it can become a valuable tool for creating precise mortise and tenon joints.
Reviews
There are no reviews yet.