LCR TC1 1.8 is a high-performance inductor that offers low resistance and high current capabilities. With a compact design, it is suitable for use in a wide range of applications, including power supply units and motor drives. The inductor is designed to provide efficient energy transfer and reduce losses in the circuit. It is built with high-quality materials and has a temperature rating of -40°C to 125°C, ensuring reliability in various operating conditions. Gesamt, LCR TC1 1.8 is a versatile and reliable inductor choice for electronic circuits requiring high performance and efficiency.
Hinweise zur Verwendung：
The capacitor shall not be tested without discharge
The inductance of the transformer cannot be tested
Don't test online with electricity
Do not hook three hooks onto the circuit board for testing
Do not test live circuit boards
Ansonsten, the tester will be burnt down. Burning the tester is the buyer's reason.
When the voltage and internal battery are below 3V, please charge before use.
Please use 5V battery or USB port to charge.
Produktbeschreibung
This is a cost-effective and widely used transistor detector. Can be used to detect NPN and PNP transistors, Kondensatoren, Widerstände, Dioden, Triodes, N-Kanal- und P-Kanal-MOSFets, Thyristoren, Batterien, usw. Can also be used to detect infrared waveforms.
Merkmale:
Can be widely used to detect NPN and PNP transistors, Kondensatoren, Widerstände, Dioden, transistors, N-Kanal- und P-Kanal-MOSFets, IGBTs, JFETS, Thyristoren, Batterien, usw.
. Zener diodes can also be detected and have a functional self-calibration.
After the detection is completed, point the infrared remote control at the "IR" Licht, and then press the button on the remote control. If the detector decodes successfully, the data code and infrared waveform will be displayed.
One-key operation, automatic detection and shutdown, you can also press the multi-function button to turn off the detector.
Place the pins of the components in the corresponding area, turn the small handle, the detector will automatically detect, and the final result will be clearly displayed on the backlit TFT screen.
Instead of the usual black and white display, this detector will display the results in color.
Spezifikation:
Power Mode: Wiederaufladbarer Lithium-Akku
Anzeige: 3.5*3cm TFT screen
Diodenbereich: < 4.5V
Zener diode: transistor detection area: 0.01-4.5V Zener diode detection area: 0.01-20V
Triac -Reichweite: IGT < 6mA
Kapazität: 25pF- 100mF
Widerstand: 0.01-50Mω
Induktivität: 0.01MH-20H
Batterie: 0.1-4.5V
Product chip: High-performance mcu
Lieferinhalt:
1* Multifunctional TFT Transistor Tester
1*Electronic components set
1*Kabel
3*Test hook
Rezensionen
Es gibt noch keine Rezensionen.