2024 WOYO PDR100 Slide Hammer Dent Puller & Tab Set
PDR Paintless Dent Repair Tools For Automotive / Motorrad…
Car Dent Repair Kits Cold Glue Tab Kits
Beschreibung:
1.The WOYO Slide Hammer Dent puller kit idea for the sheet metal processing, auto body dent removal or hail damage repair.
2.Easy operate to fix ding dent and hail damage repair with lowest expense in convenient way.
3.Use with Cold Glue, not need to heating the glue and waste the time.
4.Auto body tools slide hammer and attachments are for dent pulling, removals, can also pulls out dents in fenders, side panels.
5. This type of cold glue can be reused. Wenn Sie es verwenden, make sure the dents and your fingers are clean.
About the Cold Glue:
The cole glue is perfect for normal application temperatures below 84°F/29°C.
You can find the temperature suitable for your environment based on experience and multiple trials.
Notiz:
1. Overheating can cause the glue to melt and not stick tightly, while overcooling can also lead to weak adhesion.
2. Do not heat the glue directly.
Support Dent Shapes:
It only suit for soft and smooth dent without access to the edge.
If you need to repair the dent with access to the edge, you need to use with other assist tool.
Handle Design: Increases Friction
More Convenient to use.
The Steel Tabs and Cold glue are reusable.
The cold glue can be used directly, Don't need to waste time to wait for the heating glue.
How to use PDR100 to remove the big dent on the car?
1. Clean the car dent place.
2. Choose the tabs size you need ,and then install it .
3. Clean you hand, Stick cold glue on the tabs after heat the tabs.
4. If your Car body is cold, we suggest you to clean and heat the dent before use the slide hammer.
5. Start to repair the dent, try serveral times until cannot pull the dent.
6. When the dent can't be pulled up and not been repaired completely.
If the dent still have other shapes or mini dent, need to use other auxiliary PDR tools to repair it.
Like PDR007 / PDR009 / Rods hook / rubber hammer / other PDR kits.
7. After Finishing repairing, remove the cold glue from the tabs, confirm it clean and back to the original glue.
Three Size of the Tabs, suit for many kinds of dent.
Aufmerksamkeit: Manuelle Messung, please allow an error of 1-5mm.
For the new arrival, we will send with the cold glue in the package.
Paketliste:
Slide Hammer * 1
Steel Tabs * 3
Cold Glue * 1
Rezensionen
Es gibt noch keine Rezensionen.