The Baileigh TN-250 Tube Notcher has a unique self-centering radial vise that allows the operator to clamp down on tubes (und mehr) in any direction, including in the middle of a bend. Auch, by using a truly self-centering vice, the tube notcher is the only hole saw tubing notcher that is always centered left to right, and up and down, no matter what size tube or pipe you have.
The backbone is made from heavy duty 3/4-inch steel plate and all component interlock to create a very rigid platform to reduce vibration and prolong the life of the hole saws. The shaft of the tube notcher is a 1.25-inch Thompson shaft that rides in sealed and oiled needle bearings. Unlike other tube notchers in this category, the two ends of the shaft are completely replaceable. This helps save time and money.
The tube notcher can notch up to 2.5-inch OD and allows large degree angles. The notching carriage can pivot up to 220 degrees allowing the operator to come from the „back side“ of the notch. A large degree plate helps get these back side notches lined up. The TN-250 also has a fully adjustable axis to accommodate almost any notch combination.
Baileigh covers this tube notcher with a one-year parts warranty and lifetime technical support by phone.
Wird vom Hersteller eingestellt : Nein
Verpackungsabmessungen : 24.5 X 13 X 13 Zoll; 42.55 Pfund
Artikelmodellnummer : 1008041
Datum zuerst verfügbar : Mai 20, 2013
Hersteller : Baileigh Industrial
ASIN : B00F6GZNQY
Patented self-centering vise can clamp down anywhere on tube, including the middle of bends
Fully-adjustable axis accommodates almost any notch combination
Carriage pivots up to 220° left to right, so you can come from the „back side“ of the notch
Two slotted mounting rails move up and down with scales for offset notches up to 1″ and allow for almost any position of the bearing block
Large engraved angle finder helps you get those back-side notches lined up
1.25″ Thompson shaft rides in sealed and oiled needle bearings for smooth performance
Heavy-duty .75″ steel plate backbone and all-interlocking components create a rigid platform that reduces vibration and prolongs the life of hole saws
1. What size tubing can the Baileigh Tube and Pipe Notcher (TN-250) accommodate?
– The TN-250 can notch tubing up to 2-1/2 Zoll im Durchmesser.
2. Is the notching angle adjustable on the TN-250?
– Ja, the notching angle can be adjusted from 0 Zu 60 degrees for a wide range of notching applications.
3. How accurate are the notches created by the TN-250?
– The TN-250 is designed to produce precise and clean notches for professional results every time.
4. What type of power source is required for the TN-250?
– The TN-250 operates on standard 110V power, making it suitable for most workshop environments.
5. Can the TN-250 be easily transported to different job sites?
– The TN-250 is relatively compact and lightweight, making it portable and easy to transport to different locations as needed.
Rezensionen
Es liegen noch keine Bewertungen vor.