Anbull 1100W Electric Rebar Bender,Hydraulic Rebar Bending Machine Ben

ANBULL 1100W REBAR BENDER (NRB-20)

Spezifikation

Modell: RB-20
Wattage: 1100W
Bending Angle: 0-100 Degrees
Bending Capacity: Bending up to 20mm 3/4″ #6 rebar
Gewicht: 15.2kg / 33.5Pfund
Abmessungen: 25.6″ x 5.3″ x 8.66″

Einzelheiten

Ergonomic Upper Handle

Specifically designed for job-site operation.

Precision Quench Technology

Anbull electric hydraulic rebar bender comes with a bending block quenched with precision steel casting technology.

Multiple Ring Nut Design

High Strength Cutter Head With Durable Seals.

Pressure relief valve

When reach the angle you want, release the switch. Loosen the pressure release switch, the bending block resets.

Hydraulic-powered Piston

Hydraulic-powered piston features strong thrust with less power consumption and low noise to extend the service life.

Forced Air Cooling

Better heat dissipation and longer service life.

NRB-22 & NRB-20 Machine Head Comparison

in den Warenkorb legen
in den Warenkorb legen
in den Warenkorb legen
in den Warenkorb legen
in den Warenkorb legen

Kundenbewertungen
4.5 aus 5 Sterne 55
4.2 aus 5 Sterne 38
4.2 aus 5 Sterne 38
4.2 aus 5 Sterne 38
4.5 aus 5 Sterne 6
4.2 aus 5 Sterne 140

Preis
$469.99
$599.99
$648.37
$648.37
$269.99

Wattage
900W
1100W
1200W
1500W
/
900W

Bending/Cutting size
Bending up to 16mm 5/8″ #5 rebar
Bending up to 20mm 3/4″ #6 rebar
Bending up to 22mm 7/8″ #7 rebar
Bending up to 25mm 1 Zoll #8 rebar
Straightening Up to 25mm 1″ #8 rebar
Cutting Up to 16mm 5/8″ #5 rebar

Bending Angle
0-130 Degrees
0-100 Degrees
0-130 Degrees
0-130 Degrees
/
No

Blending Block Replaceable
No
No
Ja
Ja
Only for RB-22 & RB-25 Rebar Bender
/

Cutting/Bending speed
3-4S
5-6 S
5-6 S
5-6 S
/
2.5-3S

Powerful 1100W Pure Copper Motor: With the electric hydraulic-powered motor and piston, Anbull rebar bender makes each bend fast and efficient. It features strong thrust with less power consumption and lower noise.
Great Bending and Straightening Capacity: Anbull RB22 rebar bender has powerful push and pull capabilities allowing bending or straightening 7/8″ 22mm rebar to 0-100° within 5 Sekunden, satisfying various manufacturing needs. (Notiz: The rebar straightening head (ASIN: B097MHZYJP) cannot be used for RB-20, only for RB-22 & RB-25)
Three-point Bending: Designed with a piston that moves forward forming a three-point bending system for the rebar bending head, making bending fast and efficient.
One Button Operation: With its compact and portable design, it can be easily carried by one person for effective on-site construction. It runs on a standard 110V outlet, perfect for all rebar projects at the workplace and on the job site.
Precision Quench Technology: Equipped with a pressure relief valve to release power after bending, our electric hydraulic rebar bender comes with a bending block quenched with precision steel casting technology.