Adjustable Stand T-Shirt Curing Screen Printing Flash Dryer with Temperature Display – 18 X 18 Zoll, 2000W

• 【EXCELLENT QUALITY】- This screen printing flash dryer is all made of steel structure, using the advanced classic spraying and chrome plating. The silk screen dryer is exquisite and fine in the craft.

• 【LARGE DRYING AREA】- The effective heating area of the dryer reaches 18″ x 18″ (45 x 45 cm). The heating tubes are wrapped by a stainless steel wire mesh that has higher thermal efficiency, especially more practical for large areas that need to be dried.

• 【ACCURATE THERMOSTAT & SENSOR】- Equipped with accurate temperature controller and sensitive sensor, the temperature control range is 0-100℃. When the sensor detects that the heating area has reached the set temperature, the flash dryer for screen printing will automatically stop heating in time.

• 【ADJUSTABLE HEIGHT】- By adjusting the height adjustment knob, you can adjust the corresponding height as required. And the range of adjustment is from 30″-48″.

• 【SOLID X-SHAPED BASE】- The base of the 18×18 flash dryer adopts the X-shaped design, which saves the space area and makes the flash dryer more stable. The traditional cross design is likely to cause injuries and bumps for people, but our flash dryers overcome this shortcoming.

18″ x 18″ Flash Dryer

The effective heating area of the dryer is 18″ x 18″ (45 X 45 cm), which is very practical for large areas that need to be dried. Wrapped by stainless steel wire mesh, heating tubes have higher thermal efficiency and save energy.

This flash dryer 18×18 equips an accurate temperature controller and sensor. You can adjust the temperature as required, 0-100℃temperature control range. If the heating area has reached the set temperature, the machine will automatically stop heating in time.

2000W high-power heating pipe accelerates the speed of ink drying. The reflective aluminum plate at the rear to make the thermal efficiency higher and save energy. It uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area.

On the below support bar, there are two height adjustment knobs. The height can be adjusted up and down according to what you need, 80 cm-120 cm adjustment range.

Spezifikationen

• Eingangsleistung: 110V/60Hz
  Minimum Height: 30″
  Maximum Height: 48″
  Shipped Weight: 53 Pfund
  Assembled Dimensions: 38″ x 38″ x 48″
  Heating Area: 18″ x 18″
  Base Dimensions: 38″ x 38″
  Top Dimensions: 29″ x 19″
  Max Temp: 100 degrees Celsius
  Suggest Temp Range: 0-100 degrees Celsius
  Average Current Draw: 13 Amps
  Maximum Current Draw: 16.5 Amps
  Average Power Usage: 1350 Watt
  Maximum Power Usage: 2000 Watt

Paket Inhalt

• 1 Set of 2000W Flash Dryer With Temperature Display