50/100/150/200Pcs Replacement Steel Needles Tile Leveling Locator Level Wedges Locator Spacers Tiles Positioning Flooring Tile Carrelage
_________________________
▲Function: Ideal for floor or wall setting, ensuring flatness between tiles and avoiding movements during the mortar setting.
▲Applicable sizes: Suitable for tile gap ≥0.9mm/1.5mm.
▲Durable: Made of thick PP plastic and manganese steel, they are reusable, dauerhaft, verschleißfest.
▲Easy to use: They can be easily fixed or removed with a special wrench. (The special wrenches are included).
▲Convenient to use: They are crafted to be easily installed, reducing the need for grinding and polishing.
_________________________
1. Lay the first piece of brick, seam ≥1.5mm, and close to second bricks, insert the T-pin along the crack.
2. Rotate it 90 Grad.
3. Clamp the T-pin at the bottom of the two bricks.
4. Tighten the adjusting cover.
5. Before the cement or tile glue has completely dried up (less than 6 Std.), tighten the adjusting cover in the opposite direction, then rotate the T-pin 90 degrees to make the T-pin turns to a zigzag parallel to the tile.
6. Remove the leveler.
7. Clean and dry storage for the next use.
_________________________
1. Suitable for tile gap ≥0.9mm/1.5mm.
2. Clean the residues around the tiles and T-pin when operating.
3. Before the cement or tile glue has completely dried up (less than 6 Std.), removing the T-needle.
_________________________
1. Please allow 1-3mm differences due to manual measurement.
2. Aufgrund des Unterschieds zwischen verschiedenen Monitoren, please understand that the picture may not reflect the actual color of the item.
Bewertungen
Es gibt noch keine Bewertungen.