Der 46-1101-00 is a complete Adflo™ Powered Air Purifying Respirator with Speedglas™ Heavy-Duty Welding Helmet G5-01 (no auto-darkening filter included). The system provides High-Efficiency particulate respiratory protection for welders in a lightweight, compact design with ergonomic, adjustable head suspension. Flip front welding shield allows for a clear, wide-view protective visor for grinding and setup. Kit contains lithium ion battery, Ladegerät, High-Efficiency particulate filter, prefilter, spark arrestor, wide leather belt, and self-adjusting breathing tube. The 3M Adflo PAPR has a High-Efficiency particulate filter that can be “stacked” onto an optional 3M™ Adflo™ Cartridge (nicht enthalten) for additional protection against OV/SD/CL/HC vapors or a Nuisance Odor Pad Assembly. Audible and visual alarms signal low airflow and low battery charge. G5 Series storage/carry bag included.
Wird vom Hersteller eingestellt : Nein
Verpackungsabmessungen : 21.8 X 12.7 X 11.2 Zoll; 11.8 Pfund
Artikelmodellnummer : 94485
Batterien : 1 CR2-Batterien erforderlich. (enthalten)
Datum zuerst verfügbar : Oktober 24, 2019
Hersteller : 3M
ASIN : B07ZK5FH13
Herkunftsland : Sweden
The big (104 X 170 mm), clear protective visor is curved, with excellent views up, down and peripherally.
For more control over your comfort, the innovative G5-01 helmet airflow optimization system lets you direct the airflow to either your face, visor or somewhere in-between.
Re-configure your helmet using many of our additional accessories to find the right coverage and protection for you. Some of these optional accessories include: task light assembly, 1000 Assigned Protection Factor (APF) Montage, high-visibility head cover, leather head/neck cover, und mehr.
With the right type of filter and/or cartridge, the Adflo respirator effectively protects you against both particles and gases – all in one system. The system is NIOSH approved and provides an Assigned Protection Factor (APF) von 25 in our standard helmet assembly, and up to 1000 APF with our optional kit.
The slim profile and ergonomic design makes the G5-01 helmet more lightweight and easier to utilize in tight welding spaces .
For industrial/occupational use only. Not for consumer sale or use
1. How long does the battery last on the 3M Speedglas Welding Helmet G5-01 and Adflo High-Altitude PAPR Assembl?
Antwort: The battery life of the 3M Speedglas Welding Helmet G5-01 and Adflo High-Altitude PAPR Assembl can vary depending on usage, aber im Durchschnitt, Der Akku hält bis zu 12 Stunden bei voller Ladung.
2. Is the 3M Speedglas Welding Helmet G5-01 and Adflo High-Altitude PAPR Assembl suitable for use at high altitudes?
Antwort: Ja, the Adflo High-Altitude PAPR is specifically designed for use at high altitudes up to 16,000 Füße.
3. Can I use the 3M Speedglas Welding Helmet G5-01 and Adflo High-Altitude PAPR Assembl for all types of welding?
Antwort: Ja, the Speedglas Welding Helmet G5-01 and Adflo High-Altitude PAPR Assembl is suitable for use in a variety of welding applications including MIG, Tig, and Stick welding.
4. Can the 3M Speedglas Welding Helmet G5-01 and Adflo High-Altitude PAPR Assembl be used in hot and humid environments?
Antwort: Ja, the helmet and PAPR system are designed to withstand hot and humid conditions, making it suitable for use in a wide range of welding environments.
5. How do I clean and maintain the 3M Speedglas Welding Helmet G5-01 and Adflo High-Altitude PAPR Assembl?
Antwort: It is important to regularly clean the helmet and PAPR system with a mild detergent and water to remove any dirt or debris. Zusätzlich, it is recommended to inspect the equipment regularly for any signs of wear or damage and replace any worn parts as needed.
Rezensionen
Es gibt noch keine Rezensionen.