220V Portable Powered Electric Wire Stripping Machine
Scrap CableStripper
This machine is easy to operate and convenient to carry, can process single core copper wire, twin cores copper wire.
Product parameters
Power: 0.37kw
Voltage: 220V-50Hz
Machine weight: 38kg
Machine size: 58X28X37cm / 23X11X14.5inch
Cable Diameter: DA 1.5mm-DA 38mm / DA 0.06"-DA 1.5"
Cutting speed: 20 m / min
Package size: 65X34X42cm
Package weight: 45kg
Operation method:
1. Before feeding one wire at a time, cut off the head of the wire to avoid blade gap.
2. On the output side, if the cut on the wire is too deep, check the following:
(1) Please adjust the handles on the input side and tighten or loosen them. (M12 handle)
(2) When feeding the wire, please check that the wire is in the correct position.
(3) Make sure the blade is sharp, if not, polish it with a whetstone.
3. On the output side, if you see that the plastic (PVC) is peeled off, but the copper wires cannot be unraveled, please check the following 4 points:
(1) Grind the shaft on the upper side with a whetstone.
(2) Check if the spring is loose, if so, tighten it to make it tight.
(3) The diameter of the wire is too small, please adjust the distance between the two shafts to about 0.3-0.6mm.
(4) If the wire to be stripped is hot, the copper wire cannot be stripped.
4. If the wire is stuck in the shaft, check the following:
(1) If the springs on the pinch rollers are too tight, loosen them.
(2) There is too much oil on the cable/wire, please wipe it clean.
5. If you see the blade tilted:
(1) Check whether the central regulator is loose.
(2) Centering and adjusting the screws on both sides.
Machine Features:
1. 11 holes and 10 blades for small to large types of cables or wires
.
2. 11 different guide rails can process various types of cables from about 1 mm to 40 mm in diameter
3, can be adjusted automatically
.
4. The function of processing flat and rigid cables
.
5. The blade and the roller rotate at the same time through the gear, and the cable will not slip
.
6. The spring is adjustable to provide the correct cutting pressure
.
7. Simple operation, easy to carry, can process single-core copper wire, double-core copper wire
.
8. Copper core, single pole
.
Notice:
Make sure that the diameter of the wire is similar to the feed hole, the large wire is in the large feed hole, the small wire is in the small feed hole, and the flat wire is in the flat feed hole.
Reviews
There are no reviews yet.