The Cold Sparks Machine is a popular choice for weddings and parties as it produces sparkler-like effects without the heat or flame. It is safe for indoor and outdoor use, making it a versatile option for various events. The machine is controlled via DMX technology, allowing for precise timing and effects. It is a stylish addition to stage setups and provides a visually stunning display that is sure to impress guests. Overall, the Cold Sparks Machine is a safe and effective way to add excitement and sparkle to any event.
PERFECT USING EXPERIENCE
【Ensure a convenient and security operation】
✔ Touchable & Non-scalding
✔ Pour as much as your use
✔ Visible LED Screen & Indicators, 5-10 min to reach working temperature: 500℃
ADJUSTABLE SPARK HEIGHT for different show effects
The three gears BCD represent three different heights, but the change in height is not noticeable in BC and will be more noticeable in D. Different powders are added and the height will be different.
Remote Control
A-Gear: Start/Stop Heating
B-Gear: 1-2m
C-Gear: 2-3m
D-Gear: 4-5m
DMX SENSITIVE CONNECTION
Max. 6 machines used at the same time. We will provide you 1PC signal line and 1PC cable in the package for your quick use.
★ One-button digital control (signal wires are included)
★ Less power sources (series connection cables are not included)
★ Effective control (distance: within 49 ft)
HUMANIZED DESIGNS (Both indoor and outdoor uses)
★ Portable Carrying Handle: You can take the machines everywhere and enjoy the performances.
★ Secure Head Dissipation.
★ Durable Aluminum Alloy.
Steps
【Step 1】Insert the power cord turn on the power switch.
【Step 2】The display is on, press the menu button to enter the third page of the code.
【Step 3】Presses the A key for 3 seconds, shows L-H, and the pairing is successful.
【Step 4】Pour the powder into the powder entrance, do not add too full; Press the remote control A key to start. Preheating the temperature reaches 550°, it can be running when yellow indicator lights always on.
Attention:
★ This product is safe and environmentally friendly, non-toxic and harmless.
★ The sparking is mild and non-invasive, the hand can touch, will not burn clothes.
★ Special light machine supplies compound titanium powder need to be purchased separately.
★ Each use of the machine after the machine please clean up the residual material in the special effect machine to prevent clogging the machine.
Machine to disassemble and debug
1. Do not attempt to open the machine or disassemble and debug any parts of the machine when the machine is powered on.
2. Keep the machine dry, please do not use it on rainy or snowy days.
3. The cover on the top of the device must be covered to prevent accidental popping up.
4. Powder should be stored in a dry and sealed environment to prevent moisture.
5. Before the show and after the show, you should observe whether there are nodes in the spark output. If there is, it needs to be cleaned up. The nodes will affect the firework effect and even damage the spark machine.
6. A single power cord for electronic fireworks (machine to the power cord) only allows a maximum of 5 units to be connected in series.
7. Maximum run time is 5 minutes. It can be reused, but the machine should not be overheated.
8. lt is forbidden to move and carry machines during use.
9. Make sure that the machine is off when the powder is put in. Please cover the lid after putting in the powder to prevent the garbage from falling into the powder, causing the machine to block.
10. Install the device in a good ventilation place, at least 50cm from any surface. Ensure that the ven-tilation slot is not blocked.
11. lf you want to control the device through remote control, unplug the DMX cable and set the remote control to ON. If you want to pass the menu control device, set the remote control to OFF.
Wide application
This stage effect machine can bring you a fantastic scene, create a happy atmosphere. Perfect to use at the stage, wedding, disco, events, celebrations, opening/ending ceremony, etc.
Details
Packing List:
★ Cold flame electronic spark machine *1
★ DMX signal cable *1
★ Power cord *1（European 1.5M /American 1.5M /Japanese 1.2M）
★ Remote control *1
★ Instruction manual *1
Reviews
There are no reviews yet.