1600W SPE-Flash Dryer for Screen Printing Equipment

Instruction of 1600W Flash Dryer

 

Installations

For convenient transportation, parts of the machine have been uninstalled. Please install them in reference to the video before using.

 

Operations

1. After well installed, connect the power supply.

2. Turn on the switch and then it will work automatically.

3. Put the probe of the thermometer on the drying table, heat for some time (20 minutes in reference), and then check the actual temp. If the temp is too low or too high, just risen or lower the height of the drying box.

 

Reference Data

Based on our test,in the condition of 75F(24C)room temperature and no air flowing around the dryer,when the flash dryer has been working for about 30 minutes,the maximum temp of 5cm below the drying box can reach about 170℃(356℉)

Tips

The temp has been relations with the distance from the drying box and continuous working time,in addition to the environmental factors(e.g. Air flowing,room temp,etc.)

 

Parameters

Input voltage: 110V

Input power: 1600W

Baking area: 16”x16” (40x40cm)

Maximum temperature: 356℉ (170℃)