Product Description
104RDHOUSE Sliding Library Ladder Hardware Telescopic Upper Roller ,Hardware only,Ladder sold seperately.Assembly Required
PERFECT STAIR SLIDE TRACK
Sometimes a shelf is so high that you hardly use the upper storage room because it is not convenient to reach. While a normal ladder might be a little bit too heavy for a teenager or a lady, these easy gliding rollers designed for ladders help you glide the ladder left or right with minimal effort.
With the help of this track, you can go wherever you want, and it is effortless to climb up and retrieve things, which brings a another highlight to your home and assures you with outstanding quality.
—————————————————————————————————————————————————————————————————————
Upright top roller
When we do not need to use it, it can be placed perpendicular to the ground to reduce the floor area
With welded brackets
Bracket length: 3 1/8″; Please make sure the bookcase where you want to install the rail wider than bracket’s length
Brake bottom wheels
The position and angle to install the bottom roller can be adjusted to your most comfortable and satisfactory. It can even make up for the little shortness of the ladder (just to install the bottom roller lower). The wheels can be stopped when you lock the brake
Joint in track connector
It is used to link another track and extend the length of the track
Technical requirementInstallation requirements The installation of track plate shall meet the requirements of at least 3 3/8 “wide and 1 3/16” thickH is the height from the ground to 3 3/8 “center, which is used to calculate the length of the ladder. This height is+180mmW is the width, which is also equal to the corresponding length of the track.
—————————————————————————————————————————————————————————————————————
Can I cut the track if it’s too long ?A: Of course,there is a stopper in the accessories, after cutting the pipe does not affect the installation of the stopper
Hardware is made of carbon steel with a black finish; Only hardware for sale,wooden ladder sold seperately.
A complete set of hardware including: 2X4ft rail with 2 brackets; 2X Top wheels; 2X Stops; 2X End caps,2X brake wheels, set screws and a hex key.
The brackets are welded to the track; The distance between the two brackets: 24”，the bracket length is 3 1/8″.
When climbing the ladder, step on the brake pads to play the role of brake fixation. It will be safer for people to get on and off the bus. Release the brake pads and the ladder can move laterally.
The rolling ladder hardware is an ideal solution for residential, retail and commercial applications, suitable for bookshelves, entertainment units, retail showrooms, millwork, loft spaces and restaurants.
1. Can this sliding library ladder hardware kit be installed on any type of bookshelf or library setup?
– Yes, our 104RDHOUSE sliding library ladder hardware kit is designed to be versatile and can be easily installed on various types of bookshelves and library setups.
2. Is the telescopic upper rod adjustable to fit different ceiling heights?
– Yes, the telescopic upper rod in our hardware kit is adjustable, allowing you to customize the ladder to fit different ceiling heights and room configurations.
3. What weight capacity can this sliding library ladder support?
– Our sliding library ladder hardware kit is built with high-quality materials and can support up to 300 pounds, making it suitable for most residential and commercial library applications.
4. How easy is it to install this hardware kit?
– The 104RDHOUSE sliding library ladder hardware kit comes with detailed installation instructions and all necessary hardware, making the installation process straightforward and manageable for most DIY enthusiasts.
5. Can I purchase additional parts or accessories for this sliding library ladder kit?
– Yes, we offer various additional parts and accessories for our sliding library ladder hardware kit, allowing you to customize and expand your library ladder system to meet your specific needs and preferences.
Reviews
There are no reviews yet.