Sicuro, here is a products description optimized for SEO:
Introducing the FTDI FT231X USB RS232 Serial to DB9 Female Standard Pinout / Null Modem adapter. This reliable and high-performance device allows you to easily connect your RS232 serial devices to a USB port on your computer. The FT231X chip ensures fast and seamless data transfer, while the DB9 female standard pinout provides compatibility with a wide range of devices. The null modem functionality enables easy communication between two devices without the need for a crossover cable. Ideal for industrial, commerciale, and personal use, this adapter is a must-have for anyone in need of a convenient and efficient serial connection solution.
Parole chiave: FTDI FT231X, USB RS232, DB9 Female, Standard Pinout, Null Modem adapter
FTDI FT231X USB RS232 SERIALE A DB9 Female Stanard Pinout / Null Modem Cable Windows 7 8 8.1 10 Mac Android Linux Supported
Materiale: PVC
About FTDI FT231
FT231X – Full Speed USB to Full Handshake UART
Key Hardware Features
This USB2.0 Full Speed IC offers a compact bridge to full handshake UART interfaces. The device is a UART, capable of operating up to 3MBaud, with low power consumption (8Ma). The FT231X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.
-
Single chip USB to asynchronous serial data transfer interface.
-
Entire USB protocol handled on the chip. No USB specific firmware programming required.
-
Fully integrated 2048 byte EEPROM for storing device descriptors and CBUS I/O configuration.
-
Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
-
Data transfer rates from 300 baud to 3 Mbaud.
-
512 byte receive buffer and 512 byte transmit buffer utilizing buffer smoothing technology to allow for high data throughput.
-
FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
-
Configurable CBUS I/O pins.
-
Transmit and receive LED drive signals.
-
UART interface support for 7 O 8 bit di dati, 1 O 2 stop bits and odd / even / mark / spazio / nessuna parità
-
Synchronous and asynchronous bit bang interface options with RD# and WR# strobes.
-
Battery Charger Detection. May be used by mobile devices to detect the presence of a charger on the USB port to enable higher current / faster charging of batteries.
-
Device supplied pre-programmed with unique USB serial number.
-
Supports bus powered, self powered and high-power bus powered USB configurations.
-
Integrated +3.3V level converter for USB I/O.
-
True 3.3V CMOS drive output and TTL input.
-
(operates down to 1V8 with external pull ups and is also 5V tolerant)
-
-
Configurable I/O pin output drive strength.
-
Integrated power-on-reset circuit.
-
UART signal inversion option.
-
Internal 3.3V/1.8V LDO regulators
-
Low operating current of 8mA (typical) and USB suspend current of 125uA (typical) attuale.
-
Low USB bandwidth consumption.
-
UHCI/OHCI/EHCI host controller compatible.
-
USB 2.0 Full Speed compatible.
-
Extended operating temperature range: -40°C to 85°C
-
Available in compact Pb-free 20 Pin SSOP and QFN packages (both RoHS compliant).
Applicazioni tipiche
-
USB to RS232/RS422/RS485 Converters
-
Upgrading Legacy Peripherals to USB
-
Cellular and Cordless Phone USB data transfer cables and interfaces
-
Interfacing MCU/PLD/FPGA based designs to USB
-
USB Audio and Low Bandwidth Video data transfer
-
PDA to USB data transfer
-
USB Smart Card Readers
-
USB Instrumentation
-
USB Industrial Control
-
USB MP3 Player Interface
-
USB FLASH Card Reader and Writers
-
Set Top Box PC – USB interface
-
USB Digital Camera Interface
-
USB Hardware Modems
-
USB Wireless Modems
-
USB Bar Code Readers
-
Dedicated Charger Port (DCP) detection enabling battery charging at higher current for faster charge times.
Recensioni
Non ci sono ancora recensioni.