Bender di armani elettrici & Cutter Machine Rebar Steel Bender 1”/25 mm ha

Bender di armani elettrici & Cutter Machine Steel Bender (1600W)

Bender per armanizza & Cutter Machine

5 Seconds Cut-off Speed & 6-7 Secondi velocità di piegatura, 300% aumento dell'efficienza per gli installatori di armani!

Due regolatori angolari

Ruota Iron Idler: Ruota Idler Ø78 Gyre ad alta resistenza e ruota Ø94 Idler fissa sono realizzate con materiali di ferro

Pedale del piede umanizzato & Maniglia

Ampia applicazione: Adatto a vari scenari di costruzione

Velocità di piegatura: 6-7 Secondi
Cut-off Speed: 5 Secondi
Diametro dell'armatura: 1/4” #2 a 1″ #8 Grado 60
Angolo di piegatura: 0-180°
Raggio di piegatura: 1.57” / 40 mm
Max Rebar Hardness: HRC30
Voltaggio: 110V
Energia: 1600W
Amp: 14UN
Modello: RBC-25
Dimensioni dell'articolo(L x L x A): 19.6” X 17.7 x 31.1”
Hydraulic oil type: VG46

【Powerful 1600W Copper Coil Motor】 Equipped with a 1600W pure copper motor, this rebar cutter and bender runs quietly, has low noise, and improves working efficiency, reducing unnecessary wear. The copper motor extends the operating life of the machine. It operates at a voltage of 110V, frequency of 60 Hz, with amps of 14A, and a noise level of 92 db(UN).
【Lightning-Fast Performance】 The rebar bending and cutting machine boasts exceptional performance, bending rebar from 1/4” #2 a 1″ #8 Grado 60 (6 A 25 mm) entro 6 A 7 seconds and cutting rebar within 5-6 secondi. It can bend at any angle from 0-180° with a bending radius of 1.57” / 40 mm, and its maximum rebar hardness is HRC30. The hydraulic oil type used is VG46.
【Angle Adjustment Made Easy】 The rebar bending machine has two slide-type angle selectors, making it easy to bend any angle from 0-180 gradi. Preset angle locks ensure accurate, repeatable angle bending. During bending, the angle of point 1 must be greater than point 2 for proper operation.
【Durable Construction】 This bar bender machine has a sturdy iron machine body and durable Idler Wheel. The Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are strong and unlikely to break. It can handle super-hard rebar with strong clamping force, reducing steel rebar waste.
【Easy to Use and Transport】 The heavy-duty rebar cutter bender comes with a standard foot pedal control switch for hands-free bending. Four handles on the corners make it easy to transport and operate. It is widely used in construction engineering for bending or cutting rebar, steel bar, steel rod, screw thread steel, acciaio al carbonio, round steel, eccetera.