Meltro di cera fai -da -te Fit per il display a temperatura a LED per la creazione di candele per adulti Plug per principianti USA

1. Bottom heating is adopted, and the inner pot directly contacts with the heating ring at the bottom to conduct temperature, and the wax melting time is shortened by one-third compared with traditional products. The product adopts intelligent temperature control technology, which can accurately control the temperature of melting wax, so that the wax beans can reach the best drawing state, and will not burn the user’s skin while removing hair.
2. The temperature can be adjusted and controlled up to 120 gradi Celsius. The shell has a remarkable heat insulation effect. Even if you accidentally touch it during the heating process of the machine, you don’t need to worry about being scalded. (Nota: Wax not included)
3. The inner pot is coated with PTFE, che è resistente all'usura, beautiful and has a strong texture. The wax beans are not easy to stick to the surface, and it is easier to clean. Inoltre, the inner pot has a wax scraping setting, and the amount of wax used can be reduced according to need before waxing.
4. The Fahrenheit temperature and Celsius temperature can be switched arbitrarily (press and hold for 3 seconds to switch between the two temperatures), which caters to the usage habits of consumers in different countries and is easy to understand.
5.The wax melting temperature used last time will be memorized to the next time. If you need to use the last wax melting temperature, you don’t need to reset it. It can be done with one key, which is convenient and quick.
Nome del prodotto: Smart Wax Melting Machine
Energia: 100W
Voltaggio: 100-240V AC 50/60HZ
Capacità; 500Cc
Operation introduction~
Fare un passo 1: Connect the plug, connect the power supply, and start the switch key.
Fare un passo 2: Pour the wax beans into the inner pot as needed, Chiudi il coperchio, and set the required temperature or follow the default temperature of the machine to 85 degrees Celsius or 75 gradi Celsius.
It needs to be specially explained that the set temperature is not the maximum temperature during thof the machine to 85 degrees Celsius or 75 gradi Celsius.
It needs to be specially explained that the set temperature is not the maximum temperature during the wax melting process, but the constant temperature of the wax after the wax melting is completed. At the beginning of melting wax, the temperature will slowly rise from low to the highest temperature of 120 degrees over time, then keep at 120 degrees for 12-15 minutes to melt the wax, and then slowly drop back to the set temperature.
Inoltre, if you need to switch between Celsius and Fahrenheit, you need to press and hold the switch button for 3 seconds before switching.
Tipo di spina: Spina degli Stati Uniti, si applica al Canada, India, Messico, Thailandia, Taiwan, gli Stati Uniti, le Filippine e così via.
Colore:nero
Materiale: addominali
Misurare:157 X 157 x 145MM

Contenuto del pacco:
1 x Candle Wax Melting Pot
1 x Ac Power Cord
1 x English manual

Solo il contenuto del pacchetto sopra, Altri prodotti non sono inclusi.
Nota: Il riflesso della luce e i display diversi possono causare il colore dell'oggetto nella foto un po 'diversa dalla cosa reale. L'errore consentito dalla misurazione è +/- 1-3cm.