Autool HTS705 MACCHINA DI PULIZIONE ICIFICA A DRY MOTORE ALLOTTLE CHILTER CHILDER CRUSTER MACCHINA Rondella 110 V/220V
Autool HTS705 La pulizia del ghiaccio secco è in grado di pulire varie attrezzature. Con questa tecnica di pulizia, da un lato, Può evitare le interruzioni della produzione a causa dei tempi di inattività, E d'altra parte, Smontaggio e danni all'attrezzatura possono essere ridotti, che essenzialmente protegge l'attrezzatura e aumenta la produttività.
Nota:
La macchina HTS705 non è't contenere un compressore d'aria all'interno dell'attrezzatura, Quindi gli utenti devono acquistare un compressore d'aria extra da solo.
Il modello di compressore d'aria esterno è 7,5kw, 300L serbatoio di stoccaggio del gas. Se il compressore dell'aria esterna non lo è,per favore, non farlo'T ORDINA AUTOOL HTS705 DRY ICE BLAST CLECING MACCHINE. Se la potenza del compressore dell'aria esterna non è sufficiente, Non può inserire abbastanza pressione dell'aria nella macchina per la pulizia del ghiaccio secco,che causerà la pulizia del ghiaccio secco a non essere in grado di funzionare normalmente.

Caratteristiche :
1.[Buon aiuto per il tecnico automobilistico]Può pulire completamente i depositi di carbonio in tutte le parti(come la valvola a farfalla,valvola di aspirazione,Componente del motore,Camera di combustione del cilindro,Hub ruota e ect.) dell'auto senza smontare le parti di pulizia. Ciò riduce efficacemente il tempo di pulizia e migliora notevolmente l'efficienza.
2.[Evita lesioni al personale da materiali pericolosi]Puliziando con ghiaccio secco anziché sostanze chimiche tossiche, we can prevent harmful substances from adhering to the equipment for a long time, which can affect the overall operation and cause harm to people.
3.[Quickly removes a variety of stubborn dirty deposits]With the dry ice blast cleaning machine, the adhered dirty deposit can be thoroughly removed, and also has good protection for the equipment, so as to avoid affecting the operation and use of the equipment while being cleaned.
4.[Wide Application Range]AUTOOL HTS705 Dry ice blast cleaners are widely used in fields such as rubber, casting, automobiles, navi, energia elettrica, prodotti chimici, stampa, plastica, cibo, pharmaceuticals, and aviation.
5.[Pannello di controllo]AUTOOL HTS705 Dry ice blast cleaner buit with Intelligent microcomputer can precisely control the pressure, which can freely adjust the pressure and speed.
Istruzioni per l'uso
[Equipment debugging]:
Connect the host to the external air source and external power supply. Check whether the data of the air pressure indicator is normal and whether the power connection is normal (make sure the power supply is grounded normally).
Make preparations for testing machine, including connecting the machine and accessories properly, checking whether the parts are loose, and cleaning the unnecessary items placed on the machine body or the work area.
Turn on the power switch, then turn it to start mode first. And then press the start switch on the handle to run, adjust the dry ice volume from 0 to its maximum, check whether there is any abnormality, and then put dry ice materials into the machine for trial operation.
[Adjusting the volume of dry ice blasting]:Add an appropriate volume of dry ice and cover the lid. According to the required cleaning degree, turn the dry ice volume adjusting controller to achieve the best effect as needed (it is recommended to set it to “5” first and adjust it according to the cleaning effect).
If the barrel with smaller inner diameter is adopted, it is recommended to set it to “3” and then increase it as appropriate.
After confirmation, align the spray gun with the parts to be cleaned, and press the start switch on the handle to enter the cleaning procedure.
[Final work]:Turn the dry ice volume adjusting controller to “0” and start the spray gun to spray for 30-50s until no water is sprayed. The dry ice residue can be removed by extending the product’s spraying time, and manual cleaning is required if necessary. Turn off the power switch, disconnect the air source, and store the spray gun and accessories.





Parametro tecnico :
Alimentazione elettrica:AC110/220V±10% 50Hz
Dry ice capacity: 5KG
Compressed air flow: >1~3m³/min
State of dry ice particles: 3mm
Pressione di alimentazione dell'aria: 0.3~1.0Mpa
Dry ice blasting amount (regolabile): 0~3.2Kg/min
Misurare: 450mm*470mm*720mm
Peso netto: 47KG
Peso lordo: 50KG
External air compressor model: 7.5KW, 600L gas storage tank





Lista imballaggio :








Recensioni
Non ci sono ancora recensioni.