18-Pack Durable Steel Dethatcher Tines for Replacement GreenWorks 2702

1) Remove the screw(S).
2) Tap gently with a mallet to crack open the tine cartridge.
3) With a flathead screwdriver, pry open until you can see the pin, don’t remove the tine cartridge out of the housing.
4) Push out the pin and remove the tine.
5) Put a new tine in place.
6) Put the tine cartridge back in place, tap gently with a mallet.
➤For Replacement GreenWorks Deathatcher Model 27022, Durable Steel Tines
➤This is item is for Greenworks dethatcher units model 27022. Dethatchers are designed to remove thatch that builds up around the base of the grass and is common in lawns grown in overly acidic soil. Removing thatch build up will allow the lawn to better absorb nutrients and water and provide you with a stronger lawn growth.
➤[CHANGING THE TINES]: In order to change the tines, you’ll need: – 8mm socket, – Phillips Screwdriver (Cordless Drill recommended), – Flat head screwdriver, – Small mallet or hammer. *Be careful, the screws are not of the highest quality* if you need to change some of them, they are M5 X 22 or M5 X 25, 22 being the length under the head.
➤[Installation Procedure]: 1) Remove the screw(S).
2) Tap gently with a mallet to crack open the tine cartridge.
3) With a flathead screwdriver, pry open until you can see the pin, don’t remove the tine cartridge out of the housing.
4) Push out the pin and remove the tine.
5) Put a new tine in place.
6) Put the tine cartridge back in place, tap gently with a mallet.
➤Purchase Notes: Please make sure the part number of new replacement matches your original equipment before ordering. If you encounter any problem, feel free to let us know. We will be more than happy to reply to your message within 24 ore.