10 15 20CMX5M Rhino Skin Auto Bumper Cappuccio Protezione di protezione della vernice Vinyl C…

Descrizione:

Nome del prodotto : Car Bumper Hood Paint Protection Film

Misurare : 5M(l)*10CM 15CM 20CM

Colore: trasparente

Materiale: transparent film

Can be attached to any position you want to paste.

Caratteristiche:

1, Thin features, scalability, while sharp objects to prevent scratching the paint; transparency strong protective effect in the play, while not affect the body and interior appearance.

2, Super glue of viscosity, paste the long term remain strong to protect the surface.

3, Protective performance, prevent dust, oil adhesion.

4, Ampiamente usato, can be used for body, specchi, paraurti anteriori e posteriori, ciotola della porta, interior light area and so on.

Posizione di installazione: Front bumper, front engine cover, front rim, the outer rear-view mirror, door edge, open the inner door handles, key holes, trunk and side door pedal and so on. Can be attached to any position you want to paste.

Fare un passo:

1.Primo, you want to stick better than many parts of the protective film needed

2.The need to paste the site clean , make sure that no impurities or wax or something

3.Wth a fine sprinkling the surface of the wet

4.Torn end of paper, adesivi, ready to film

5.Scraped off with a scraper to sprinkle fine , you can replace the hard card

6.Corner trim the excess portion

7.Gun with roast bake flat corners , E tu're done with a good scraper scrape

How to paste:

1. With alcohol or foam cleaning agents will be posted where all the clean dirt,

such as the surface must be washed clean and wax.

2. The foil and place need to paste the shape to make a comparison, cut off the

extra part.

3. The mucosal tear clung to it, if uneven places with cards evenness, and then

hot air gun (or hair dryer) Calore, lightly loose.