High Pressure Nano Spray Oxygen Injector Household Portable Handheld Oxygen Injector Nano Spray Facial Moisturizing Beauty Apparatus Promote Absorption Clean Pores Skin Care USB Charging
Características:
1. Handheld oxygen injection device: nano water replenishment + high pressure oxygen injection + facial cleansing + absorption promotion, multiple skin care, make your skin moist, smooth and full of vitality.
2. The 0.3mm nano-jet atomization injects moisture and nutrients into the skin quickly and efficiently, deeply hydrating and rejuvenating the skin.
3. 360Kpa high pressure dredges, promotes the skin to absorb nutrients, effectively tightens the skin, dilutes fine lines, brightens the complexion, and improves dull and rough skin.
4. 3 gears are adjustable, you can adjust the gears according to your own skin condition and usage time, and absorb nutrition more in place.
Especificaciones:
Material: Space aluminum
Color: champagne gold
Tamaño: 136*42*42milímetros
Tamaño de embalaje: 183*125*50milímetros
Voltaje de carga: 5V 1A
Capacidad de batería: 1200mah
Tiempo de carga: 2 horas
Lista de embalaje:
1* host
1* watering can
1* Cable de carga USB
1* Manual de usuario en inglés
Precauciones:
①After receiving the instrument, fully charge it and then use it, the charging indicator light flashes when charging, and is always on when fully charged.
②The host is not completely waterproof, please do not use it in a high humidity environment for a long time or rinse it with water to avoid water damage to the motherboard.
③It is recommended to control the use time within 20 minutos. After long-term use, please turn off the instrument in time for internal cooling for more than 30 minutos.
④When the battery power is low, the voltage is too low, and the fog is small, the instrument should be turned off immediately and charged.
⑤Please charge the charger strictly according to the input voltage requirements.
⑥ The products used by the spray gun must be water-based products (the products with high concentration and strong stickiness must be diluted with mineral water).
⑦After the spray gun is connected to the host, if there are no special circumstances, try to reduce the disassembly as much as possible to avoid too many installations and serious wear of the screw teeth.
⑧Inject warm water or alcohol to clean it (clean the inner wall of the spray gun) antes de usar.
⑨ After each use, it must be poured into warm water to clean it again, and sprayed for a few seconds after spraying (to avoid the blockage or water leakage of the spray gun due to the condensation of the product).
⑩When the instrument is turned on, if the host key is not operated within 10 minutos, it will automatically shut down for protection; when the product is not used for a long time, please be sure to charge it every 6 meses.
Reseñas
Aún no hay reseñas.