Detalle：
*100% Para estrenar , Alta calidad
*Material: PÁGINAS,Orina(Cañas), Nylon, Hierro
*The length of the pole (1piezas): 410milímetros;
*Direct brush head: 100mm/150mm;
*Extendable length：
9Pcs rods:5m/16.5FEET
12Pcs rods:6.7m/22FEET
25Pcs rods:14m/45.9FEET
*【Safety】 Regular cleaning of cotton wool and other deposits in the pipeline can effectively increase the permeability of the pipeline and effectively prevent the risk of fire in the dryer. Al mismo tiempo, the removal of deposits in the chimney can effectively prevent the lack of oxygen due to pipe blockage, which may eventually cause carbon monoxide to enter the room and endanger human health.
*【Save money】 One cleaning can save you all the costs of purchasing this product. Entonces, you can clean it at any time and save money every time.
*【Multi function】 This product can be used to clean fireplace pipes, chimney pipes, dryer pipes and other types of pipes. It is not recommended to clean flexible foil pipes, as the foil may tear and damage the pipes.
*【Simple】 With a cordless electric drill, rotate the rod clockwise and slowly clean it back and forth to easily and simply clean the pipeline.
Cómo usar：
1. Connect a sufficient number of poles as needed;
2. Install the brush head on the pole, (if you use a power drill, go ahead and install the hex pole);
3. When you start off go slow and clean out 2-3 feet at a time and pull the brush back towards you to bring all the dust junk back to or down to you. Going vertical to push the junk out won't work. However horizontal may work for you.
4. Get someone to do the drill work for you as you guide the rod and brush in and out of the pipe. As you go in pull it back and forth and then go in further. Once you have done about 3 feet pull it all back out to bring the junk back to you.
5. WEAR A MASK !! There will be dust everywhere. It will smell like fabric softener everywhere.
ADVERTENCIA: Never force the brush/rod assembly through the duct! If it should become jammed, pull assembly away from constricted area a few inches (still rotating in a clockwise direction) then slowly push forward.
ADVERTENCIA:Please do not bend the rod connecting the electric drill. If you have to bend, the bending angle should not exceed 30 °, and please turn it at a very, very slow speed. De lo contrario, the product will be damaged by you!
ADVERTENCIA: When the length of the pole is greater than the length you need to use. Please remove the extra poles. De lo contrario, the redundant rods will be twisted together due to the rotation of the electric drill, and the rods will be damaged!
Especificación:
*Please understand that there will be a little error in manual measurement.
Reseñas
Aún no hay reseñas.