3/8″ Copper Moonshine Destiling Thumper para 1 Galón Growler Jug Etha

Made with 3/8″ OD copper tubing and FDA silicone stopper. 100% Grado de alimentos, sin plomo, solvent tolerant.
One gallon glass jug copper thumper glass jug no incluido.They can be purchased at your local homebrew or winemaking shop or online for usually around $6-$10.
This will also fit in most glass wine jugs and 64 oz half gallon growlers. Just slide the stem up to make it the right length.
Attach the in flow, long tube, to your still and attach the out flow, short tube, to your condenser and you have successfully raised the percent abv by around 50%. This is why it is referred to sometimes as a “doubler.”
You can easily run 3 o 4 of these in line and create a similar result as reflux columns. You can also use it to flavor your neutral spirits. It works very well as a flavor enhancer when filled with juice, cinnamon, half a lemon, or whatever your favorite flavors are!
Attach it your way, This product comes with 1/2″ MPT compression fittings attached using high temp delron ferruls so they are not permenantly attached for easy cleaning or removal to attach tubing directly to the copper tubing.
Perfect size for 5 gallon batches or larger.
Encaja 1 Gallon jugs and Growlers
3/8″ OD Copper Tubing
1/2″ MPT Brass Compression Fittings
Sencillo y eficaz!

1. q: What is the purpose of a thumper in a moonshine distilling setup?
A: A thumper is used to increase the alcohol content of the distillate by adding an additional distillation stage, resulting in a smoother and higher proof final product.

2. q: How does a thumper work in relation to a copper moonshine distilling setup?
A: The thumper acts as a re-distillation chamber where vapor from the main pot still passes through a liquid (such as water or mash) in the thumper, allowing for further purification and alcohol concentration.

3. q: Will the 3/8″ Copper Moonshine Distilling Thumper fit my 1 gallon growler jug?
A: Sí, this thumper is designed to fit snugly onto a 1 gallon growler jug, allowing for easy attachment to your moonshine distilling setup.

4. q: How should I clean and maintain my copper thumper?
A: To clean your thumper, simply rinse it with warm water and mild soap after each use. Avoid using abrasive cleaners that could damage the copper. Además, to maintain the integrity of the copper, occasionally polish the thumper with a copper cleaner.

5. q: What benefits does using copper in a thumper provide in the distilling process?
A: Copper is known for its ability to remove sulfur compounds and other impurities from the distillate, resulting in a cleaner and more flavorful final product. Además, copper helps to conduct heat evenly, aiding in the distillation process.