The 2.5W Round Solar Oxygen Pump is a stable and silent water air aerator pump designed for use in aquariums, fish tanks, ponds, and outdoor fishing oxygenation. It runs on solar power, making it an eco-friendly option for oxygenating water. The pump is compact and easy to install, making it a convenient choice for maintaining healthy oxygen levels in your aquatic environment. Its efficient design ensures that the pump operates silently while providing a steady stream of oxygen to support aquatic life. En general, this solar oxygen pump is a reliable and effective solution for oxygenation in various water environments.
Product Introduction:
This product is a solar powered oxygenation pump that can float in water and is suitable for oxygenating fish and seafood products in small fish tanks, ponds, and outdoor fishing. The product is equipped with a 2200mAh lithium battery, which is used to store excess electricity and allow it to continue working at night. Simply place the solar panel in a sunny area and in water, and the product will automatically start.
Product features:
[Solar powered] Environmentally friendly, portátil, easy to install, no wiring, no operating costs, and maintenance free. Solar energy is also safer for your child.The built-in 3.7V2200mAh lithium battery pack is used to store electricity, so the oxygen pump can also work at night.
[Mute] Stable and silent oxygen pump, with a volume below 60 decibels and an output of 0.8 liters/minute, suitable for oxygen augmentation in various types of small containers. [Working mode] The product is in intermittent working mode, working for 10 seconds and stopping for 10 secondsParameters:
Solar panel: 2.5W., 6V PET
Batería: 18650 3.7V2200mAH lithium battery pack
Rated voltage of the product: 3V DC
Volume: Below 60 decibels
Gas volume: 0.8L/min
Charging time: 5-6 horas
Tracheal length: 150cm
Packaging List
1 * Solar powered oxygen pump
1 * Accessories package
1 * Bubble stone
1 * Tracheal
1 * English instruction manual
Instructions for use:
Connect the bubble stone to the exhaust hole and place it in water that needs to be oxygenated. The solar panel faces the sunlight, and there is no obstruction between the solar panel and the sunlight. The product will start working!
matters needing attention:
1. This product is an electronic product. The solar panel receives sunlight and there is an air pump inlet hole on the surface. This part cannot be immersed in water and the guide hole cannot be blocked. (As shown in the figure)
2. This product is a solar energy product, and the charging speed is related to the intensity of sunlight. Please regularly clean the dirt on the solar cell and adjust the angle of the solar panel to improve charging efficiency.
Reseñas
Aún no hay reseñas.