1300W Hand-Held Electric Concrete Vibrator Vibrating Poker 2m Hose Shaft 35mm

The 1300W Hand-Held Electric Concrete Vibrator is a powerful tool used for vibrating concrete to remove air bubbles and ensure a smooth finish. It comes with a 2m hose shaft and 35mm diameter poker for effective operation. This tool is portable and easy to use, making it ideal for construction projects where concrete needs to be compacted quickly and efficiently. The electric motor provides consistent power, allowing for precise control during the vibrating process. Overall, this concrete vibrator is a reliable and effective tool for any concrete finishing job.

1300W Electric Concrete Vibrator Vibrating Poker 2m Hose Shaft Hand-Held 4300rpm

Note:

There are two specifications of products in this link: American and European;

American standard voltage 110V; European standard voltage 220V;

According to the country, we will send products with corresponding specifications.

Specifications

Model: 35-1

Material: Nylon, Steel Wire, Rubber, Copper

Style: Handheld Concrete Vibrator

Color: Yellow

Power Source: Corded Electric

Motor Type: Pure Copper Motor

Plug: US Standard/EU Standard

Power: 1300W

Actual Power: About 1000W

Speed: 4300RPM

Plug Voltage: 110V/220V

Power Cord Length: 2m/6.6ft

Vibrating Rod Size(L*D): 2m*35mm/6.6ft*1.3inch

Package Included

1* Concrete Vibrator

1* Vibrating Rod

Notes

• Before running the concrete vibrator, you should check whether the power cord connection is correct and put on insulated gloves (not included). After the power is turned on, if the concrete vibrator does not produce vibration, you can generally knock the end of the concrete vibrating rod to the ground, and after the vibrator makes a smooth and powerful chirping sound, you can carry out the pounding operation.

• When a vibrating rod works, it should be inserted vertically or inclined into the soil, pounding vibration after some time can be. The vibration of the vibrating rod should be up and down pumping. The vibrating rod should not be bent more than 60°.

• After working continuously for half an hour, the vibrating rod should stop for a while to prevent the machinery from heating too much and damaging the machine parts.

• After using it for some time, the vibrating rod should be checked to see if the threaded connection of the rod head is loose to prevent the mortar water from penetrating the rod, causing the vibrating rod not to vibrate.

• Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.