Product Description
5/8″ Drill Bridge/Construction Reamer with 1/2″ Shank Chuck
Specification:
Length:6-3/8″
Item Diameter:5/8″
Cutting Length:4-1/2″
Cutting Diameter:0.63″
Cutting Direction:right-hand
Material:High-Speed Steel (HSS）
Shank Diameter:1/2″
HSS 5/8″ Bridge/Construction Reamer,enlarge and align existing holes for Steel,Metal, Alloy, Aluminum, Wood etc
Reaming with a magnetic drilling machine.
Mounted to an impact drill for faster results.
Point is tapered to permit entry into overlapping holes.
Made more easily work of steering knuckles and pitman arm.
It used for aligning an existing hole and enlarging undersized hole.
Aligns and enlarges pre-drilled holes ready for bolting,make the bolt holes line up.
Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs.
The bit is used to expand a hole to 5/8″. At first there must be a 1/2”,1/4”,1/8”,3/8”,3/16”,5/16”,7/16”,9/16”,5/32”,7/32”,9/32”,11/32”,13/32”,15/32”pre-drilled hole,then ream out to 5/8″.
Warm Tips:Pls kindly put some cutting oil before you use the construction reamer.
Package Dimensions : 6.93 x 2.17 x 1.65 inches; 5.93 ounces
Date First Available : May 7, 2022
Manufacturer : NOVINO
ASIN : B09ZQPKQ9W
The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our 5/8″ reamer bit aligns and enlarges pre-drilled holes ready for bolting.
Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8″ before using our 5/8″ Bridge/Construction Reamer.
The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm.
The 5/8″ bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8″. At first there must be a 3/8″ pre-drilled hole,then ream out to 5/8″.
Commonly used in bridge,construction,steel erection and automotive truck trailer industries,our 5/8” reamer bit for steel,metal,alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools
1. What is the purpose of a drill bridge/construction reamer?
A drill bridge/construction reamer is primarily used for enlarging and finishing holes in metal, wood, and other materials. It is commonly used in construction, metalworking, and woodworking projects.
2. What is the difference between a drill bridge reamer and a regular drill bit?
A drill bridge reamer is designed to create precise and accurate holes with a smooth finish. It is typically used for enlarging existing holes or creating holes to a specific diameter. Regular drill bits, on the other hand, are designed for drilling holes of various sizes but may not provide the same level of accuracy and finish as a reamer.
3. How do I properly use a drill bridge reamer?
To use a drill bridge reamer, first, insert the shank chuck into a drill press or other compatible tool with a 1/2″ chuck. Securely tighten the chuck to ensure the reamer is held in place. Slowly and steadily drill the reamer into the material, applying consistent pressure. Be sure to clean the reamer regularly to prevent buildup and ensure smooth cutting.
4. Can a drill bridge reamer be resharpened or reconditioned?
Yes, most drill bridge reamers can be resharpened or reconditioned to extend their lifespan and maintain cutting performance. It is recommended to send the reamer to a professional sharpening service or reamer manufacturer for reconditioning to ensure it is done correctly.
5. What materials can a drill bridge reamer be used on?
A drill bridge reamer can be used on a variety of materials, including metal, wood, plastics, and composite materials. It is important to select the appropriate type of reamer (e.g., HSS or carbide) based on the material being worked on to ensure optimal cutting performance and longevity.
Reviews
There are no reviews yet.